Highway I/44 Červenohorské sedlo – South
Modernisation of Highway I/44 Červenohorské sedlo – South
Ředitelství silnic a dálnic ČR
09/2014 – 06/2017
The Project in Numbers
- 7,913.50 m Length of modernised section of highway I/44
- 407.93 m Height difference between start and end of modernised section
- 7.15% Maximum lengthwise slope
- 17 m Minimum radius of arc at axis
- 11,465 m3 Volume of gabion retaining walls
- 53 Number of modernised or new culverts
The modernisation of the I/44 consisted of an expansion of the carriageway and the addition of necessary safety elements and highway equipment. Its axis goes along the original route, because the highway goes through the most exposed zone of Jeseníky Protected Natural Area. For this reason, it was not possible to establish temporary bypasses. The contract included a gabion retaining wall, the complete modernisation or making of new culverts for draining the land and the repair of a bridge over the River Desná.
Exceptional Nature of Project
The modernisation of this section of a class I highway in the mountainous environment of Jeseníky Protected Natural Area required, both during preparations and realisation, the solution of a whole number of demanding technical and organisational tasks. The fully functional work was performed under the condition that during construction the highway had to be brought into premature use three times in the winter. The road’s modernisation led to an overall improvement in its technical condition with a long-term benefit for safety, in particular.
Check out other reference structures from the field of Roads and Bridges
Construction of the S8 road
Powazkowska – Modlinska, Warsaw, Poland
Modernization consisted of extending the road according to local conditions by one lane in each direction.
Construction of the D3 motorway
Tábor – Veselí nad Lužnicí
The section of the D3 motorway Tábor – Veselí nad Lužnicí included a set of structures with a total length of approximately 26 kilometers.